Application: | Automobile, Construction, Woodworking |
---|---|
Material: | Polyurethane |
Main Raw Material: | Polyurethane |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
ISO standard 600ml sausage / 310ml tube Windshield bonding one component polyurethane sealant for auto glass / automotive
DELY PU sealant is a high-quality non-sag one component polyurethane adhesive sealant specially designed for aftermarket. It cures on exposure to atmospheric humidity to form a durable elastomer.
It is suitable for the windshield replacement, or bonding/sealing of a variety of materials for vehicle body in aftermarket.
General Grade One component, easy to use;
Non sagging;Fast cure;
Good adhesion without primer;
Resistant to aging and weathering.
Technical Data (Temperature:25±2 Humidity:50±5%RH)
BeforeCure |
||
Appearance |
vision |
Black paste |
Density(g/cm3) |
GB/T13477.2 |
1.25±0.05 |
Tack free time(min) |
GB/T13477.5 |
25 |
Cure speed(mm/24h) |
- |
3.0 |
Application temperature() |
- |
5~35 |
After cure |
||
Tensile strength(MPa) |
GB/T528-1998 |
4.6 |
Elongation at break (%) |
GB/T528/1998 |
≥300 |
Hardness(Shore A) |
GB/T531-1999 |
55±5 |
Shear strength(MPa) |
GB/T7124 |
≥2.5 |
Max. tension≥KN/mm |
GB/T529 |
18 |
Working temperature() |
- |
-40~80 |
When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 12 months (cartridge), 9 months (sausage).The recommended storage temperature is 5-25°C, humidity is <50% RH. It is strictly prohibited that the transportation or storage temperature is over 30°C or the humidity is over 80% RH. And high-temperature container transportation is prohibited as well.
1. The sealant is moisture curable, which should be used up once opened.
2. Other application process should be done within skin formation time, or it will affect the adhesion performance.
3. The curing rate is affected by the temperature and humidity. If it cures too fast, the sealant layer may have bubbles, and affect its quality.
Suppliers with verified business licenses